Chem Tech Pulsafeeder Series 100 Manual. However, a few precautionary notes should be adhered to. Stroke length is manually adjustable.
Pulsafeeder ChemTech Series 100150 User Manual Page 2 / 12 from www.manualsdir.com
(optional) series 100/150 chemical pumps are rated to pump against a line pressure up to 100 psi (7 bar). The pump is now ready for priming and operation. With a range offering up to 100 gpd (15.76 lph), the series.
Web 30 Gpd @ 100 Psi, 230 Vac.
The pump is now ready for priming and operation. With a range offering up to 100 gpd (15.76 lph), the series. Return the system to operating conditions and reconnect the power to the pump.
Deterioration Is Noted, Replace Part With Proper.
Always use caution and check for leaks at. The treated water is the best indication of the correct pump setting. Check seat and ball checks for chips, clean gently.
Remove And Replace Or Clean Off Any Scale Or Sediment.
Web series 150 models are built upon the same solid platform as the 100 models, these units are capable of higher flow rates. If the line pressure on an installation could. Gaskets and check valves when checking the.
C (Installing Feeder At The Base Of Tank On A Platform) Is The Most Trouble Free Type Of Installation.
However, a few precautionary notes should be adhered to. (tank stands and platforms are available for all size. Web each series 100/150 chemical feeder has been tested to meet prescribed specifications and certain safety standards.
A fluid is pumped from a chemical storage tank to the point of injection by the pulsing action of the diaphragm. (optional) series 100/150 chemical pumps are rated to pump against a line pressure up to 100 psi (7 bar). Web a test for chemical residual in.
